Vancer x Arbiter Studio AKITSU vs Endgame Gear OP1 8k - Mouse Comparison - EloShapes
The Endgame Gear OP1 8k is slightly larger than the Vancer x Arbiter Studio AKITSU. The Vancer x Arbiter Studio AKITSU weighs 25% less than the Endgame Gear OP1 8k. The Vancer x Arbiter Studio AKITSU uses the Huano Dragon Claw mechanical switches rated for 80 million clicks, while the Endgame Gear OP1 8k uses the Kailh GX mechanical switches rated for 80 million clicks. The Vancer x Arbiter Studio AKITSU uses the TTC Gold mechanical encoder, while the Endgame Gear OP1 8k uses the TTC Silver mechanical encoder. The Vancer x Arbiter Studio AKITSU is wireless, while the Endgame Gear OP1 8k is wired. The Vancer x Arbiter Studio AKITSU is made from carbon fiber composite, while the Endgame Gear OP1 8k is made from plastic. Both mice have a max DPI of 26000. Both mice have a polling rate of 8000 Hz.
Vancer x Arbiter Studio AKITSU | Endgame Gear OP1 8k | |
|---|---|---|
Category | Small | Small |
Length mm | 118.0 | 118.2 |
Width mm | 59.7 | 60.5 |
Height mm | 36.5 | 37.2 |
Weight grams | 38.0 | 50.5 |
Category | Symmetrical | Symmetrical |
Hand compatibility | Right | Right |
Hump placement | Center | Back - moderate |
Front flare | Outward - slight | Flat |
Side curvature | Flat | Flat |
Thumb rest | No | No |
Ring finger rest | No | No |
Name | ||
Type | Optical | Optical |
Position | Centered (50%) | Forward (54%) |
MCU | ||
DPI | 26000 | 26000 |
Polling rate Hz | 8000 | 8000 |
Tracking speed IPS | 650 | 650 |
Acceleration G | 50 | 50 |
Wired | Yes (USB-C) | Yes (Non-detachable) |
Wireless | Yes (2.4 GHz) | No |
Bluetooth | No | No |
Hot-swap battery | No | No |
Side buttons | 2 | 2 |
Middle buttons | 0 | 0 |
Hot-swap switches | No | Yes |
Switches | Huano Dragon Claw Mechanical 80M | Kailh GX Mechanical 80M |
Encoder | TTC Gold Mechanical 24 steps | TTC Silver Mechanical 24 steps |
Free spin | No | No |
Side tilt | No | No |
Thumb wheel | No | No |
Material | Carbon fiber composite | Plastic |