Darmoshark M3 V2 vs SteelSeries Rival 3 - Mouse Comparison - EloShapes
The Darmoshark M3 V2 is larger than the SteelSeries Rival 3. The Darmoshark M3 V2 weighs 25% less than the SteelSeries Rival 3. The Darmoshark M3 V2 has a much better sensor (PixArt PAW3395) than the SteelSeries Rival 3 (SteelSeries TrueMove Core). The Darmoshark M3 V2 has the highest max DPI of 26000, while SteelSeries Rival 3 has a max DPI of 8500. The Darmoshark M3 V2 uses the Huano Transparent Blue Shell Pink Dot mechanical switches rated for 80 million clicks, while the SteelSeries Rival 3 uses the Zippy DF3-P1L1 mechanical switches rated for 60 million clicks. The Darmoshark M3 V2 uses the TTC Gold mechanical encoder, while the SteelSeries Rival 3 uses a mechanical encoder. The Darmoshark M3 V2 has the highest polling rate of 8000 Hz, while the SteelSeries Rival 3 has a polling rate of 1000 Hz. The Darmoshark M3 V2 is wireless, while the SteelSeries Rival 3 is wired.
Darmoshark M3 V2 | SteelSeries Rival 3 | |
|---|---|---|
Category | Large | Medium |
Length mm | 129.6 | 120.6 |
Width mm | 66.1 | 67.0 |
Height mm | 39.2 | 38.0 |
Weight grams | 58.0 | 77.0 |
Category | Symmetrical | Symmetrical |
Hand compatibility | Right | Right |
Hump placement | Center | Back - minimal |
Front flare | Outward - moderate | Flat |
Side curvature | Inward | Inward |
Thumb rest | No | No |
Ring finger rest | No | No |
Name | ||
Type | Optical | Optical |
Position | Centered (50%) | Backward (45%) |
DPI | 26000 | 8500 |
Polling rate Hz | 8000 | 1000 |
Tracking speed IPS | 650 | 300 |
Acceleration G | 50 | 35 |
Side buttons | 2 | 2 |
Middle buttons | 0 | 1 |
Hot-swap switches | No | No |
Switches | Huano Transparent Blue Shell Pink Dot Mechanical 80M | Zippy DF3-P1L1 Mechanical 60M |
Encoder | TTC Gold | Unspecified Mechanical Encoder |
Connectivity | Wireless | Wired |
Material | Plastic | Plastic |