Razer DeathAdder V3 Pro vs HyperX Pulsefire Saga Pro - Mouse Comparison - EloShapes
The Razer DeathAdder V3 Pro is larger than the HyperX Pulsefire Saga Pro. The Razer DeathAdder V3 Pro weighs 13% less than the HyperX Pulsefire Saga Pro. The Razer DeathAdder V3 Pro has a slightly better sensor (Razer Focus Pro 30K) than the HyperX Pulsefire Saga Pro (HyperX 26K). The Razer DeathAdder V3 Pro has the highest max DPI of 30000, while HyperX Pulsefire Saga Pro has a max DPI of 26000. The Razer DeathAdder V3 Pro uses the Razer Optical Mouse Switches Gen-3 rated for 90 million clicks, while the HyperX Pulsefire Saga Pro uses the HyperX Optical Switches. The Razer DeathAdder V3 Pro uses the RAESHA Yellow mechanical encoder, while the HyperX Pulsefire Saga Pro uses the TTC Silver mechanical encoder. The Razer DeathAdder V3 Pro has the highest polling rate of 8000 Hz, while the HyperX Pulsefire Saga Pro has a polling rate of 4000 Hz. Both mice are wireless.
Razer DeathAdder V3 Pro | HyperX Pulsefire Saga Pro | |
|---|---|---|
Category | Large | Medium |
Length mm | 128.0 | 119.7 |
Width mm | 68.0 | 67.2 |
Height mm | 44.0 | 39.8 |
Weight grams | 63.0 | 72.0 |
Category | Ergonomic | Ergonomic |
Hand compatibility | Right | Right |
Hump placement | Center | Back - moderate |
Front flare | Outward - slight | Outward - slight |
Side curvature | Inward | Inward |
Thumb rest | No | No |
Ring finger rest | No | No |
Name | ||
Type | Optical | Optical |
Position | Centered (50%) | Centered (51%) |
MCU | - | |
DPI | 30000 | 26000 |
Polling rate Hz | 8000 | 4000 |
Tracking speed IPS | 750 | 650 |
Acceleration G | 70 | 50 |
Wired | Yes (USB-C) | Yes (USB-C) |
Wireless | Yes (2.4 GHz) | Yes (2.4 GHz) |
Bluetooth | No | Yes |
Hot-swap battery | No | No |
Side buttons | 2 | 2 |
Middle buttons | 0 | 0 |
Hot-swap switches | No | No |
Switches | Razer Optical Mouse Switches Gen-3 Optical 90M | HyperX Optical Switches Optical |
Encoder | RAESHA Yellow Mechanical 24 steps | TTC Silver Mechanical 24 steps |
Material | Plastic | Plastic |