SteelSeries Rival 3 vs ATK F1 V2 Ultra Max - Mouse Comparison - EloShapes
The SteelSeries Rival 3 is slightly larger than the ATK F1 V2 Ultra Max. The ATK F1 V2 Ultra Max weighs 30% less than the SteelSeries Rival 3. The ATK F1 V2 Ultra Max has a much better sensor (PixArt PAW3395 Ultra) than the SteelSeries Rival 3 (SteelSeries TrueMove Core). The ATK F1 V2 Ultra Max has the highest max DPI of 30000, while SteelSeries Rival 3 has a max DPI of 8500. The SteelSeries Rival 3 uses the Zippy DF3-P1L1 mechanical switches rated for 60 million clicks, while the ATK F1 V2 Ultra Max uses the ATK Light Blade mechanical switches. The SteelSeries Rival 3 uses a mechanical encoder, while the ATK F1 V2 Ultra Max uses the TTC Gold mechanical encoder. The ATK F1 V2 Ultra Max has the highest polling rate of 8000 Hz, while the SteelSeries Rival 3 has a polling rate of 1000 Hz. The ATK F1 V2 Ultra Max is wireless, while the SteelSeries Rival 3 is wired.
SteelSeries Rival 3 | ATK F1 V2 Ultra Max | |
|---|---|---|
Category | Medium | Medium |
Length mm | 120.6 | 118.2 |
Width mm | 67.0 | 62.4 |
Height mm | 38.0 | 38.8 |
Weight grams | 77.0 | 54.0 |
Category | Symmetrical | Symmetrical |
Hand compatibility | Right | Right |
Hump placement | Back - minimal | Back - minimal |
Front flare | Flat | Outward - moderate |
Side curvature | Inward | Inward |
Thumb rest | No | No |
Ring finger rest | No | No |
Name | ||
Type | Optical | Optical |
Position | Backward (45%) | Centered (49%) |
MCU | ||
DPI | 8500 | 30000 |
Polling rate Hz | 1000 | 8000 |
Tracking speed IPS | 300 | 650 |
Acceleration G | 35 | 50 |
Wired | Yes (Non-detachable) | Yes (USB-C) |
Wireless | No | Yes (2.4 GHz) |
Bluetooth | No | Yes |
Hot-swap battery | No | No |
Side buttons | 2 | 2 |
Middle buttons | 1 | 0 |
Hot-swap switches | No | No |
Switches | Zippy DF3-P1L1 Mechanical 60M | ATK Light Blade Mechanical |
Encoder | Unspecified Mechanical Encoder | TTC Gold |
Material | Plastic | Plastic |